1. The main car finds the power switch of the hood.Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
2. Specific steps: (1) First open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. ( 2) Pull the handle of the car engine with your hand and hear a bang. ( 3) Check whether the hood of the car is open. If there is an obvious gap, it means that the hood of the car has been opened.
3. Method: Turn on the hood switch first, then lift the hood, and finally support the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure.The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
4. First of all, for safety's sake, please make sure that the car is completely turned off and stationary. In this way, there will be no sparks to avoid accidents when opening the hood. Secondly, find the switch of the car hood. The position of the switch is usually under the steering wheel of the driver's seat or next to the co-driver's glove box.
1. At the bottom left of the central console of the vehicle, above the clutch pedal, on the edge of the black plastic plate, there is a long strip of small wrench, hold it in your hand, gently pull it back, click one After the sound, you can go to the front to open the engine cover. The sales consultant who sold your car failed in business ability.
2. The hood switch is in the car and needs to be turned on manually. The position of the switch is around the foot pedal. There is a switch button on the left side of the pedal. We can press the switch to open the outer hood. Put the hydraulic cylinder of the hood into the groove of the hood to support it.
3. First, find the hood switch of the car and pull up the hood of the car as shown in the figure.When the hood snap of the car bounces open, put your hand into the gap of the hood and move the snap to the right.
4. The car hood is to press the engine cover unlock button in the car, and then open it. There will be a lock under the engine cover to open it.
1. The main car finds the power switch of the hood. Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
2. Most of the car engines on the market in conventional modeThe cover switch is located on the lower wing plate of the driver's side, where there is something similar to a handle, and it will ring when the hood is gently pulled. It is worth noting that the hood handle on the driver's side of some BMW cars needs to be pulled twice to open.
3. Method: Turn on the hood switch first, then lift the hood, and finally support the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure. The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
Turn on the car engine and pull the engine switch handle on the left side of the driver's seat by hand. After hearing a bang, you can pull up the hood. Some cars are not so good.To open the hood of the car by pressing the button on the car's central control or remote control key, or using the key.
Open the driver's door of the car. Pull the hood inside the car to open the wrench and unlock the hood. Lift the hood of the engine up. Use the hood support rod to firmly support the hood of the engine.
Find and turn on the hood locking switch below the driving position of the car, turn on the switch connected to the hood and the front with your finger at the front of the car, and lift the hood. The specific operation steps are as follows. Tools: JEEP car.
1. The front hood is located above the engine at the front of the vehicle, as shown in the following figureIndication: The specific operation steps to open the engine hood of the vehicle are as follows: open the driver's door of the car. Pull the hood inside the car to open the wrench and unlock the hood. Lift the hood of the engine up.
2. If it is a front-engine car, the hood is located at the front of the car. If it is a car with a rear or middle rear engine, the hood is located at the rear of the car. Some cars have front mid-engines, and the hood of this car is also at the front of the car. The hood is the cover of the car body, not a structural part.
3. If it is a car with a front engine, the hood is located at the front of the car. If it is a car with a rear or rear middle engine, the hood is located at the rear of the car. The engine of some cars is in the front middle, and the hood of this kind of car is also at the front. The hood is the cover of the car body, and this part is not a structural part.
4. The hood of the car is above the engine compartment. The car engine, which is what we call the engine, has a different layout of the vehicle, and the position of the cabin may be different. Cars that can often be seen on the street, the engine is in the front of the body. In the first compartment of the sedan, the hood is the engine cover above the front body.
5. The hood is located at the head of the car, covering above the engine compartment. For some vehicles with rear engines, the hood is located at the rear of the car. The hood is mainly made of rubber foam and aluminum foil, which has the function of reducing engine noise, isolating engine heat and covering and protecting internal parts.
6. Between the front windshield and the front bumper. When standing in front of the vehicle and looking at the engine area of the vehicle, the hood isIt is the cover in front of you. When driving, the hood is closed, completely covering the engine and internal parts of the vehicle to ensure safety and the appearance of the vehicle.
The car mainly found the power switch on the hood. Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
Method: Turn on the hood switch first, then lift the hood, and finally hold the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure.The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
First, find the hood switch of the car and pull up the hood of the car as shown in the figure. When the hood snap of the car bounces open, put your hand into the gap of the hood and move the snap to the right.
[Pacific Automobile Network] Generally, there is a hood switch handle on the left side of the driver's seat. Pull this handle with your hand. After hearing a popping sound, the hood pops out a gap. Put your hand into the gap, open the hood auxiliary card hook handle, and lift the hood up.
Lift the hood switch in the car to find the lock switch icon of the hood in the car, hook the switch with your finger and lift the switch up. Touch the front of the car, the hood switch, lift it up and put it down.Turn off, come to the position of the front hood, and use your finger through the gap of the hood to open the switch connecting the hood and the front of the car.
Binance US-APP, download it now, new users will receive a novice gift pack.
1. The main car finds the power switch of the hood.Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
2. Specific steps: (1) First open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. ( 2) Pull the handle of the car engine with your hand and hear a bang. ( 3) Check whether the hood of the car is open. If there is an obvious gap, it means that the hood of the car has been opened.
3. Method: Turn on the hood switch first, then lift the hood, and finally support the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure.The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
4. First of all, for safety's sake, please make sure that the car is completely turned off and stationary. In this way, there will be no sparks to avoid accidents when opening the hood. Secondly, find the switch of the car hood. The position of the switch is usually under the steering wheel of the driver's seat or next to the co-driver's glove box.
1. At the bottom left of the central console of the vehicle, above the clutch pedal, on the edge of the black plastic plate, there is a long strip of small wrench, hold it in your hand, gently pull it back, click one After the sound, you can go to the front to open the engine cover. The sales consultant who sold your car failed in business ability.
2. The hood switch is in the car and needs to be turned on manually. The position of the switch is around the foot pedal. There is a switch button on the left side of the pedal. We can press the switch to open the outer hood. Put the hydraulic cylinder of the hood into the groove of the hood to support it.
3. First, find the hood switch of the car and pull up the hood of the car as shown in the figure.When the hood snap of the car bounces open, put your hand into the gap of the hood and move the snap to the right.
4. The car hood is to press the engine cover unlock button in the car, and then open it. There will be a lock under the engine cover to open it.
1. The main car finds the power switch of the hood. Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
2. Most of the car engines on the market in conventional modeThe cover switch is located on the lower wing plate of the driver's side, where there is something similar to a handle, and it will ring when the hood is gently pulled. It is worth noting that the hood handle on the driver's side of some BMW cars needs to be pulled twice to open.
3. Method: Turn on the hood switch first, then lift the hood, and finally support the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure. The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
Turn on the car engine and pull the engine switch handle on the left side of the driver's seat by hand. After hearing a bang, you can pull up the hood. Some cars are not so good.To open the hood of the car by pressing the button on the car's central control or remote control key, or using the key.
Open the driver's door of the car. Pull the hood inside the car to open the wrench and unlock the hood. Lift the hood of the engine up. Use the hood support rod to firmly support the hood of the engine.
Find and turn on the hood locking switch below the driving position of the car, turn on the switch connected to the hood and the front with your finger at the front of the car, and lift the hood. The specific operation steps are as follows. Tools: JEEP car.
1. The front hood is located above the engine at the front of the vehicle, as shown in the following figureIndication: The specific operation steps to open the engine hood of the vehicle are as follows: open the driver's door of the car. Pull the hood inside the car to open the wrench and unlock the hood. Lift the hood of the engine up.
2. If it is a front-engine car, the hood is located at the front of the car. If it is a car with a rear or middle rear engine, the hood is located at the rear of the car. Some cars have front mid-engines, and the hood of this car is also at the front of the car. The hood is the cover of the car body, not a structural part.
3. If it is a car with a front engine, the hood is located at the front of the car. If it is a car with a rear or rear middle engine, the hood is located at the rear of the car. The engine of some cars is in the front middle, and the hood of this kind of car is also at the front. The hood is the cover of the car body, and this part is not a structural part.
4. The hood of the car is above the engine compartment. The car engine, which is what we call the engine, has a different layout of the vehicle, and the position of the cabin may be different. Cars that can often be seen on the street, the engine is in the front of the body. In the first compartment of the sedan, the hood is the engine cover above the front body.
5. The hood is located at the head of the car, covering above the engine compartment. For some vehicles with rear engines, the hood is located at the rear of the car. The hood is mainly made of rubber foam and aluminum foil, which has the function of reducing engine noise, isolating engine heat and covering and protecting internal parts.
6. Between the front windshield and the front bumper. When standing in front of the vehicle and looking at the engine area of the vehicle, the hood isIt is the cover in front of you. When driving, the hood is closed, completely covering the engine and internal parts of the vehicle to ensure safety and the appearance of the vehicle.
The car mainly found the power switch on the hood. Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
Method: Turn on the hood switch first, then lift the hood, and finally hold the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure.The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
First, find the hood switch of the car and pull up the hood of the car as shown in the figure. When the hood snap of the car bounces open, put your hand into the gap of the hood and move the snap to the right.
[Pacific Automobile Network] Generally, there is a hood switch handle on the left side of the driver's seat. Pull this handle with your hand. After hearing a popping sound, the hood pops out a gap. Put your hand into the gap, open the hood auxiliary card hook handle, and lift the hood up.
Lift the hood switch in the car to find the lock switch icon of the hood in the car, hook the switch with your finger and lift the switch up. Touch the front of the car, the hood switch, lift it up and put it down.Turn off, come to the position of the front hood, and use your finger through the gap of the hood to open the switch connecting the hood and the front of the car.
485.45MB
Check756.67MB
Check488.64MB
Check973.42MB
Check488.29MB
Check547.67MB
Check129.39MB
Check128.87MB
Check879.46MB
Check218.34MB
Check125.93MB
Check955.69MB
Check179.79MB
Check464.92MB
Check968.43MB
Check556.35MB
Check555.76MB
Check145.64MB
Check732.68MB
Check825.53MB
Check493.87MB
Check626.37MB
Check791.17MB
Check668.72MB
Check921.15MB
Check247.49MB
Check166.41MB
Check945.43MB
Check565.34MB
Check288.89MB
Check538.37MB
Check174.76MB
Check433.69MB
Check758.34MB
Check295.86MB
Check367.93MB
CheckScan to install
Binance US to discover more
Netizen comments More
2088 竞今疏古网
2025-02-03 02:44 recommend
1755 南腔北调网
2025-02-03 02:33 recommend
99 自取其咎网
2025-02-03 01:28 recommend
1013 仁心仁术网
2025-02-03 00:23 recommend
1282 仪表堂堂网
2025-02-03 00:16 recommend